Technical features

11 February 2012

Sterilizzazione rifiuti infetti

Disinfection plants water

Treatment plants air

Sterilization plants waste

NEWSTER Group

Newster Technologies Srl

Tel +378 0549.960576
Fax +378 0549.960585

Via dei Dativi, 35/37
47899 Serravalle (RSM)
C.O.E. SM 18338

Newster Technologies Srl

Tel +378 0549.960576
Fax +378 0549.960585

Via dei Dativi, 35/37
47899 Serravalle (RSM)
C.O.E. SM 18338

Newster 10

Technical Features

Heat sterilization:	Protein demolition in humid environment following dehydration with 150°C peak temperature at end of cycle
Heating method:	shocks and frictions
Cycle duration:	30 minutes approximatively
Processing potential:	30 kg/h with a humidity of 10%
Treated waste external aspect:	Small-size homogeneous granules
Final volume:	1/4 of initial volume
Processed waste final weight:	Slightly heavier than dry matter
Sterilization vessel volume:	130 liters approximatively
General control system:	Programmable Logic Controller (PLC)
Temperature measurement:	Resistive temperature detectors
Cycle recording:	Time-temperature flow recording
Final cooling:	A circa 100 °C tramite evaporazione di H₂0
Dust abatement:	In humid enviornment
Vessel closing lid:	Manual, mechanical blocking and double safety device
Rotating blades and fixed counterblades:	Made of special metals
H₂O consumption:	75 litres per hour
Water discharge:	Syphon-connection to sewer
Power consumption:	Main engine 22 Kw Pre-heating resistances 2 Kw Air compressor 0,2 KW Centrifugal depressor 0,36 Kw Air cooling aspirator 0,36 Kw Overall max 25 Kw
Size and Weight: Sterilizzatore: Armadio Filtri: Quadro Elettrico:	80 x 160 x 150 cm 750 Kg 80 x 35 X 110 cm 70 Kg 60 x 90 x 180 cm 160 Kg
Total Weight:	980 Kg

Newster 10

depliant

System overview